Dell Lifecycle Controller Integration Version 3.3 for Microsoft System Center Configuration Manager User's Guide

Applying a FC HBA profile on a collection

1. Click Browse and select the FC adapter port profile that you created by using the System Viewer utility. This profile is applied during the hardware configuration process. For more information on creating FC HBA profiles, see Creating an FC HBA profile.
2. After you select FC adapter port profile, you can validate if the configuration is applied based on the following rules mentioned in Table 5:

   Table 1. FC HBA profile settings

   S.No	Target system	FC adapter port profile setting	What is applied
   1	One adapter port	More than one adapter port is configured	FC adapter port profile settings are applied on the matched ports.
   2	More than one adapter port	More than one adapter port is configured	Each adapter port in the target system is matched against the FC adapter port profile and FC adapter port profile settings are applied on the matched adapter ports.
   3	More than one adapter port	One adapter port is configured	Each adapter port in the target system is matched against the FC adapter port profile and if match occurs, profile is applied on the adapter port.

   NOTE A match is based on location, slot number, and port number.
3. Click Next to configure an FC HBA profile.
   NOTE If any of the FC HBA attributes are not available from Lifecycle Controller, those attributes are not applied on FC adapter port.