Dell Lifecycle Controller Integration Version 3.3 for Microsoft System Center Configuration Manager User's Guide

Configuring target systems

DLCI for Configuration Manager supports only yx1x systems and later. For each system in the collection, enable Collect System Inventory on Restart (CSIOR) in the iDRAC settings.

NOTE In the server name format yx1x; y denotes alphabets, for example M, R, or T; and x denotes numbers.

By default, CSIOR is OFF. The part replacement feature provides the option to set the CSIOR.

To enable CSIOR on multiple systems, see Configuring part replacement properties for a system.

To enable CSIOR for earlier server generations:

Restart the system.
During Power-on Self-Test (POST), when the system prompts you to enter the iDRAC Utility, press <CTRL>< E>.
Select System Services from the options available and press <Enter>.
Select Collect System Inventory on Restart and press the right or down keys and set it to Enabled.

To enable CSIOR for Dell’s 12th and later generation of PowerEdge servers:

Select <F2> during POST to enter System Setup.
Select iDRAC Settings and click Lifecycle Controller.
Select Collect system inventory on Restart (CISOR).

Welkom

Welkom bij Dell

Dell Lifecycle Controller Integration Version 3.3 for Microsoft System Center Configuration Manager User's Guide

Configuring target systems

To enable CSIOR for earlier server generations:

To enable CSIOR for Dell’s 12th and later generation of PowerEdge servers:

Beoordeel deze inhoud