- Notes, cautions, and warnings
- Copyright
- Introduction
- Getting started: Basics
- Configuring thin client settings locally
- Configuring
Connections locally
- Configuring and managing the browser connections
- Configuring and managing Citrix connections
- Configuring and managing VMware connections
- Configuring and managing RDP connections
- Configuring and managing the custom connections
- Configuring and managing the SSH connections
- Configuring and managing the VNC viewer connections
- Configuring and managing the Ericom PowerTerm connections
- Security settings
- Additional management configurations
- Viewing XTerm
- Imaging solutions
- Central Configuration: Automating Updates and Configurations
- DHCP options tags
- Mixed Environment Imaging – An Enhanced Method of Upgrading
Dell Wyse ThinLinux 1.0.3 Administrator’s Guide
Configuring the sound settings
By default,
the Sound screen is available in both User mode and Admin mode. Any
changes made through Sound screen is saved and retained for the built-in
thinuser.
- Click the
Output tab to configure the
audio output settings.
- Move the Output volume slider to adjust the output or speaker volume. Click the Output volume button to enable or disable the output volume.
- Select the device for sound output from the listed output devices. The default audio output is the Analog Output.
- Based on the channels available for the selected output device and profile, you can adjust the Balance and Fade values by moving Balance and Fade sliders respectively.
- Select the audio profile from the drop-down list.
- Click the Test Speakers option. A dialog box is displayed. You can perform the speaker testing by playing sample wave files.
- Click the
Input tab to configure the
audio input settings.
- Move the Output volume slider to adjust the output or speaker volume. Click the Output volume option to enable or disable the output volume.
- Select the device for sound input from the listed input devices. The default audio input is the Analog input.
- Move the Input Volume slider to adjust the input or Mic volume. Click the Input volume option to enable or disable the input volume.
- The Input level meter bar shows the input volume peak level.
Geef een beoordeling (1-5 sterren).
Geef een beoordeling (1-5 sterren).
Geef een beoordeling (1-5 sterren).
Selecteer of het artikel nuttig is of niet.
Opmerkingen mogen geen speciale tekens bevatten: <>() \