Dell OpenManage Server Administrator Version 7.3 Command Line Interface Guide

Description	Slow initializes a virtual disk. CAUTION: You may receive a warning message if you attempt to delete the system or boot partition. However, this warning message is not generated always. Ensure that you do not delete the system or boot partition or other vital data when using this command.
Syntax	`omconfig storage vdisk action=slowinit controller=id vdisk=id`, where id is the controller ID and virtual disk ID as reported by the omreport command. NOTE: To obtain these values, type omreport storage controller to display the controller IDs and then type omreport storage vdisk controller=ID to display the IDs for the virtual disks attached to the controller. NOTE: In some circumstances, you may receive a warning message if this command deletes the system or boot partition. You can override this warning by using the force=yes parameter. In this case, the syntax is as follows: omconfig storage vdisk action=slowinit controller=id vdisk=id force=yes
Example to	Slow initialize virtual disk 4 on controller 1.
Example	`omconfig storage vdisk action=slowinit controller=1 vdisk=4`

Omconfig Slow Initialize Virtualize Disk