Hopp til hovedinnhold
Logg ut

Velkommen til Dell

Min konto
  • Legg inn bestillinger raskt og enkelt
  • Vis bestillinger og spor forsendelsesstatus
  • Opprett og få tilgang til en liste over produktene dine
  • Administrer Dell EMC-områder, produkter og kontakter for produktnivå ved hjelp av virksomhetsadministrering.
Logg på Opprett en konto Premier-pålogging Pålogging for partnerprogrammet
Kontakt oss

Dine Dell.com-handlevogner

Inspiron 14 5000 Service Manual

PDF

Procedure

  1. Connect the power-adapter port cable to the system board.
    • CAUTION: To avoid damaging the system board, ensure that no cables are placed under it.
  2. Slide the I/O-board cable into its connector on the system board and close the latch to secure the cable.
  3. Connect the power-adapter port cable to the system board
  4. Turn the system board over.
  5. Slide the ports on the system board into the slots on the palm-rest assembly and place the system board on the palm-rest assembly.
  6. Align the screw hole on the system board with the screw hole on the palm-rest assembly.
  7. Replace the screw that secures the system board to the palm-rest assembly.
  8. Adhere the tape to the antenna cables.
  9. Connect the speaker cable to the system board.
  10. Slide the display cable into its connector on the system board and close the latch to secure the cable.
  11. Turn the computer over and open the display as far as possible.
  12. Slide the touch-pad cable and the power-button board cable into their connectors on the system board and close the latches to secure the cables.

Vurder dette innholdet

Nøyaktig
Nyttig
Brukervennlig
Var denne artikkelen nyttig?
0/3000 characters
  Oppgi vurderinger (1–5 stjerner).
  Oppgi vurderinger (1–5 stjerner).
  Oppgi vurderinger (1–5 stjerner).
  Velg om artikkelen var nyttig eller ikke.
  Kommentarer kan ikke inneholde disse spesialtegnene: <>()\