Gå vidare till huvudinnehållet
  • Lägg beställningar snabbt och enkelt
  • Visa beställningar och kontrollera leveransstatus
  • Skapa och kom åt en lista över dina produkter
  • Hantera dina webbplatser, produkter och kontakter på produktnivå från Dell EMC med hjälp av företagsadministration.

Dell PowerEdge T320 Systems Owner's Manual

PDF

Removing The System Feet

  • NOTE: It is recommended that you remove the system feet only when you are converting the system from the tower mode to the rack mode, or when you are replacing the system feet with the wheel assembly.
  1. Rotate the system feet inward.
  2. Lay the system on its side on a flat, stable surface.
  3. Remove the screws securing the system feet to the base of the tower.
    Figure 1. Removing and Installing the System Feet The figure shows removing and installing the system feet.
    1. base of the tower
    2. system feet (4)
    3. screws (4)

Betygsätt det här innehållet

Korrekt
Användbart
Lätt att förstå
Var den här artikeln till nytta?
0/3000 characters
  Ange betyg (1–5 stjärnor).
  Ange betyg (1–5 stjärnor).
  Ange betyg (1–5 stjärnor).
  Ange om artikeln var användbar eller inte.
  Kommentarer får inte innehålla följande specialtecken: <>()\