- Notes, cautions, and warnings
- VRTX Storage Subsystem Compatibility Matrix
- Minimum version requirement for baselines
- Baseline threshold guidelines
- Storage subsystem baseline types
- Baseline v11—Promotes CMC firmware version
- Baseline v10— Support for additional Operating systems
- Baseline v9— Support for additional Operating systems
- Baseline v8— Support for additional Operating systems
- Baseline v7— Support for PowerEdge M640
- Baseline v6—current baseline Support for Self-Encrypting Drives and bug fixes
- Baseline v5—Shared Storage Expansion through Shared PERC 8 external controllers
- Baseline v4—Fault tolerant support for Linux operating systems and bug fixes
- Updating firmware
- Updating server modules
- Updating PowerEdge VRTX enclosure components
- Documentation resources
Välkommen
Dells webbplatser
Dells webbplatser
Välkommen till Dell
Mitt konto
- Lägg beställningar snabbt och enkelt
- Visa beställningar och kontrollera leveransstatus
- Skapa och kom åt en lista över dina produkter
- Hantera dina webbplatser, produkter och kontakter på produktnivå från Dell EMC med hjälp av företagsadministration.
Dell PowerEdge VRTX Storage Subsystem Compatibility Matrix
Updating server modules
Before updating
the server modules, ensure that you download the latest available
Windows DUP versions of the following components from Dell.com/support/home:
- Shared PERC
8 OS driverNOTE VMware ESXi is part of the Dell ESXi image.
- iDRAC
- CPLD (Complex Programmable Logic Device)
- BIOS
- Update the operating system specific Shared PERC 8 driver on all
the server modules.
NOTE For Windows and Linux operating systems, see the Shared PERC 8 User’s Guide available at Dell.com/support/home.NOTE The VMware driver is part of the Dell customized ESXi image. For more information about the VMware drivers, see vmware.com. For more information about installing async drivers, see kb.vmware.com.
- Update the iDRAC firmware for each server module by using Windows
DUP and the iDRAC web interface. You can also update the iDRAC firmware
of all the server modules at a time by using the PowerEdge VRTX CMC
web interface.
NOTE You must activate the Enterprise license and enable the Extended Storage feature.NOTE The update process may take several minutes.
- Update the CPLD on each server module by using Windows DUP and iDRAC
web interface.
NOTE Select the Install and Reboot check box after uploading the DUP. It enables the server module to restart and update the CPLD.The server module is power cycled that results in the iDRAC web interface being inaccessible for three minutes.
- Update the BIOS on each server module by using Windows DUP and the
iDRAC web interface. You can also update the BIOS of all the server
modules at a time by using the PowerEdge VRTX CMC web interface.
NOTE You must activate the Enterprise license.NOTE Select the Install and Reboot check box after uploading the DUP. It enables the server module to restart and execute the BIOS update.
Ange betyg (1–5 stjärnor).
Ange betyg (1–5 stjärnor).
Ange betyg (1–5 stjärnor).
Ange om artikeln var användbar eller inte.
Kommentarer får inte innehålla följande specialtecken: <>()\