How to decode raw data on ECC memory errors for the PowerEdge C1100, C2100, C6100, C6105, C6145, C6220 and C8220.

How to decode raw data on ECC memory errors for the PowerEdge C1100, C2100, C6100, C6105, C6145, C6220 and C8220.



Article Summary: This article describes how to decode raw data on ECC memory errors in the System Event Log on the PowerEdge C1100, C2100, C6100, C6105, and C6145.


Issue:

For PowerEdge C-series servers use the attached excel tool to decode the SEL RAW data to figure out which DIMM slot is/was having problem.

Note: This tool is only for decoding memory ECC errors.


Solution:

How to collect the RAW SEL data:

  1. Use IPMI tool to get SEL RAW event data with the following parameter
    #ipmitool sel list -v (Find out the memory related RAW event data from output.)
  2. Download the excel file and open it.
  3. Select the platform you’re working on from the drop-down list and fill in the RAW event data which you got in step#1 in Cell#B2 and press Enter.
  4. It will tell you which DIMM slot has a problem.
Note: Use the impitool sel list -v command to get Event Raw Data.

Example one of SEL record:

SEL Record ID : 0021
Record Type : 02
Timestamp : 02/08/2012 12:40:58
Generator ID : 0021
EvM Revision : 04
Sensor Type : Memory
Sensor Number : 60
Event Type : Sensor-specific Discrete
Event Direction : Assertion Event
Event Data : a1ff14 (This is the Event Raw data you need to fill the 6 bytes into cell#B2.)
Description : Uncorrectable ECC




記事ID: SLN156243

最終更新日: 03/07/2016 09:59 AM


この記事を評価する

正確
有益
分かりやすい
この記事は役に立ちましたか?
はい いいえ
フィードバックをお寄せください
コメントでは、以下の特殊文字は利用できません: <>()\
申し訳ありませんが、フィードバックのシステムは現在ご利用いただけません。後でもう一度試してください。

フィードバックをありがとうございます。