1 Rookie

 • 

43 Posts

April 9th, 2018 10:00

Hi pullecalo,

I *think* I understand your question/problem.  When the Graphics Amplifier is attached, the system will power on, detect that the Amplifier is connected, and then disable the onboard discrete GPU, and then restart again.  I have seen this take a couple cycles before the system finally powers up.  Your HDD making a noise, is what would be expected if power is removed abruptly.  IF the system starts to come up normally on the Amp and is working after a few seconds (I would say no more than 20 seconds), I wouldn't worry about it.  If it is not coming up at all, and you are under warranty, you should phone Dell/Alienware :-)

Rich S.

7 Technologist

 • 

4.4K Posts

April 13th, 2018 13:00

Hi, 

Send me your Service Tag in a PM, so we can look further into this. 

No Events found!

Top