Unsolved
This post is more than 5 years old
8 Posts
0
691
February 4th, 2019 15:00
Aurora R1, IO isolation failed
Hi, I had some issues with my Corsair vengeance Ram only running on 1300mhz. I tried to get it work on normal 1600mhz. XMP did not work, I tried some manu. Settings, nothing worked. I changed uncore v + 40 and activated XMP. Left everything else on auto.
The pc bootet with 12x150=1800mhz, Windows got an error: Stoppcode:Reference by Pointer Bootloop-> I changed to default settings, changed ahci to raid system. New error code Stoppcode:IO isolation failed -> bootloop I’m totally confused, the ram ist working finde von 12x133=1600mhz but Windows 10 will not boot. Should I try to repair with windows 10 / install new windows 10. My system : Aurora R1 I7 960 3,2ghz
No Events found!
Tesla1856
10 Wizard
•
17.9K Posts
•
71.1K Points
0
February 4th, 2019 15:00
1333mhz is normal/stock speed. It's Tri-channel (and 3 dimms in memory bank should match exactly).
DownClocking to 1333 and being stable ... is normal and expected.
I don't think you can use XMP (those aren't Dell/AW dimms ... so wrong Profiles burnt into them).
vinoookie
8 Posts
0
February 4th, 2019 15:00
But now I got a bootloop with „IO initialization failed“.
Tesla1856
10 Wizard
•
17.9K Posts
•
71.1K Points
0
February 4th, 2019 20:00
Install the 3 original dimms to populate Primary-Memory-Bank.
Consult PDF manual.