Unsolved
This post is more than 5 years old
1 Rookie
•
20 Posts
0
2028
May 19th, 2020 05:00
Aurora R10, HyperX Fury ram upgrade, issues
I purchased a 16GB (8x2) kit of HyperX Fury PC4-25600 3200MHz ram from Amazon and installed it in my Aurora R10 and removed the original 8GB stick it came with. The Aurora R10 booted fine and the ram was running at 3200MHz after I changed the XMP profile to 2. After a couple of days, the Aurora R10 started acting weird and when I rebooted the Aurora R10 it would reboot 3 times, then error and say that it turned off the overclock feature in BIOS. Then once I logged into Windows, it reset the ram to 2400MHz speed. I then changed it back to the XMP Profile 2 again like before and it wouldn't reboot and then it did the same thing. I set it then on Auto and it now booted fine and runs at 2934MHz. The Aurora R10 is rated to work with ram at 3200MHz speed. I wonder why it became so unstable? Anyone else have this issue or know of a fix? I'd like to run it at 3200MHz if possible, although I know there isn't much of a difference but still might as well if possible?
Husker22
1 Rookie
•
9 Posts
1
August 16th, 2020 09:00
did you ever get this figured out? i am having the same issues
Husker22
1 Rookie
•
9 Posts
0
August 16th, 2020 12:00
Thanks for replying. I have the exact same memory except mine are two paired 16gb sticks. I can get it to run 3200 perfectly until reboot, then it goes to 2400 and no higher. Auto, XMP1 or XMP2 nothing seems to work. I put in all the numbers manually, (Upping voltage etc) and it will run but it throws all my timings waaaay out of wack on reboot. I am totally at a loss of what to do. I would gladly take 2933 at this point with my 32gb. But i can't even get that.
Jeff_Duan
1 Message
0
June 27th, 2021 12:00
Thanks Anonymous, I had exactly same issue as the op, but able to get 3200mhz by using profile OC1 in bios.
I got 64gb (32gbx2) hyperx fury 3200mhz RAMs, it has slightly slower performance than you posted in its XMP configurations.
it has 3200mhz 16-20-20 and 3000mhz 16-19-19. both @ 1.35v. default is 2400mhz 17-17-17 @ 1.2v
speedstep
11 Legend
•
47K Posts
0
June 27th, 2021 14:00
To be clear from a Dell warranty and policy perspective,
OEM BIOS and OEM tested/validated memory sticks work without issues
user should not expect non-tested/non-validated retail memory sticks to work at all or be supported.
Validated OEM (original equipment manufacturer) memory =
0N6VG 16GB, HyperX Fury XMP DDR4, 3400MHz, 1GBx8, Unbuffered, 288 pin, Dual Rank, 1.35V, Non-ECC, Kingston X0N6VG-HYD2
JV223 16GB, XMP DDR4, 3400MHz, 2Gx64, Unbuffered, 288 pin, Single Rank, 1.35V, Non-ECC, Kingston XJV223-HYA, XJV223-MIE
VTW4H 32GB, XMP DDR4, 3200MHz, 288 pin, Dual Rank, 1.25V, Non-ECC, Kingston XVTW4H-MIE
N205T 16GB, HyperX Fury XMP DDR4, 3200MHz, 2GX64, Unbuffered, 288 pin, Dual Rank, 1.25V, Non-ECC, Kingston XN205T-MIE/XN205T-MIE2
W21KG 8GB, XMP DDR4, 3200MHz, 1Gx64, Unbuffered, 288 pin, Single Rank, 1.25V, Non-ECC
RMWRN 16GB, HyperX Fury XMP DDR4, 2933MHz, 2Gx64, Unbuffered, 288 pin, Dual Rank, 1.35V, Non-ECC, Kingston XRMWRN-HYA/XRMWRN-MIE/XRMWRN-MIE2
J69DF 8GB, HyperX Fury XMP DDR4, 2933MHz, 1Gx64, Unbuffered, 288 pin, Single Rank, 1.35V, Non-ECC, Kingston XJ69DF-HYA/XJ69DF-MIE/XJ69DF-MIE2
RGM6C 16GB, HyperX Fury XMP DDR4, 2666MHz, 2Gx64, Unbuffered, 288 pin, Dual Rank, 1.25V, Non-ECC, Kingston XRGM6C-MIB/XRGM6C-MIE/XRGM6C-MIE2
TP9W1 16GB, HyperX Fury XMP DDR4, 2666MHz, 1Gx72, Unbuffered, 288 pin, Dual Rank, 1.25V, Non-ECC,
5H5PW 8GB, HyperX Fury XMP DDR4, 2666MHz, 1Gx64, Unbuffered, 288 pin, Dual Rank, 1.25V, Non-ECC, Kingston X5H5PW-MIB/X5H5PW-MIE/X5H5PW-MIE2
Y7N41 8GB, DDR4, 2666MHz, 1Gx64, Unbuffered, 288 pin, Single Rank, 1.25V, Non-ECC
TP9W1 16GB DDR4, 2666MHz, 1Gx72, Unbuffered, 288 pin, Dual Rank, 1.25V, Non-ECC
Adata AO2P26KCST2-BZJSHC
Hynix HMA82GU6CJR8N-VK, HMA82GU6DJR8N-VK, HMA82GU6JJR8N-VK
Kingston KTP9W1-HYJ, KTP9W1-MID, KTP9W1-MIE
Micron MTA16ATF2G64AZ-2G6E1, MTA16ATF2G64AZ-2G6H1, MTA16ATF2G64AZ-2G6J1
Samsung M378A2K43CB1-CTD, M378A2K43DB1-CTD
Y7N41 8GB DDR4, 2666MHz, 1Gx64, Unbuffered, 288 pin, Single Rank, 1.25V, Non-ECC
Adata AO2P26KC8T1-BXGSHC
Hynix HMA81GU6CJR8N-VK, HMA81GU6DJR8N-VK, HMA81GU6JJR8N-VK
Kingston KY7N41-HYJ, KY7N41-MID, KY7N41-MIE
Micron MTA8ATF1G64AZ-2G6E1, MTA8ATF1G64AZ-2G6H1, MTA8ATF1G64AZ-2G6J1
Samsung M378A1K43CB2-CTD, M378A1K43DB2-CTD
Aurora R10 motherboard NWN7M pegatron 69M10HT00B01 released on December 9, 2019 is supported by Dell with these OEM CPU =
* HXPR2 AMD R5-3500, 6C, 65W
V7JDD AMD R5-3600, 6C, 65W
2HCV8 AMD R5-3600X, 6C, 95W
VF3FD AMD R5-3600XT, 6C, 95W
XNKFV AMD R7-3700X, 8C, 65W
4GX0G AMD R7-3800X, 8C, 105W
VJ84G AMD R7-3800XT, 8C, 105W
CHMWG AMD R9-3900, 12C, 65W
6KJC4 AMD R9-3900X, 12C, 105W
2F53D AMD R9-3900XT, 12C, 105W
1MHH5 AMD R9-3950X, 16C, 105W
Aurora R10 motherboard TYR0X pegatron 69M10HT20A01 released on January 11, 2021 is supported by Dell with these OEM CPU =
* HXPR2 AMD R5-3500, 6C, 65W
VVDNW AMD R5-5600X, 6C, 65W
NTMXC AMD R7-5800, 8C, 65W
P0M7X AMD R7-5800X, 8C, 105W
MCW0T AMD R9-5900, 12C, 65W
KGKW8 AMD R9-5900X, 12C, 105W
MMX5C AMD R9-5950X, 16C, 105W