Confirm you are running the latest bios version 2.1.3 and test again under OC1.
The Dell support app didn't suggest there was a newer firmware so I didn't go looking. There is and it sorted all my issues. Now passing all memory tests, both windows and dell preboot diagnostics memory checks.
Thank you very much for the information on the HyperX Fury ram. I read all the threads pertaining to the Aurora R10 memory. With that information I decided to order the following ram: HyperX Fury Black 32GB 3466MHz DDR4 CL17 DIMM (Kit of 2) HX434C17FB4K2/32. I hope this is the right ram which I will find out after I install it later today. I will remove the OEM 16Gb stick and add the 2 sticks of HyperX Fury. I will post an update after I get the results and run Cpuid CPU-Z to obtain test results. Thank you again for the help.
Jaxsonnz
62 Posts
0
August 2nd, 2021 16:00
Traditionally yes, but the newer series of R10s seem ok with the HyperX Fury ram too, possibly even more so than the older original R10 boards.
Vanadiel
6 Professor
•
7.1K Posts
0
August 2nd, 2021 05:00
There is a large thread dedicated to the R10 and memory configurations.
Be aware that what works for 1 person, might not for another. The only official supported memory for the R10 is the validated memory.
R10 Memory thread
R10 validated memory
JOcean
9 Legend
•
12.6K Posts
0
August 2nd, 2021 05:00
The most compatible RAM for Dell systems has always been Crucial. The RAM for your system can be found on this web page.
Jaxsonnz
62 Posts
0
August 2nd, 2021 16:00
Confirm you are running the latest bios version 2.1.3 and test again under OC1.
The Dell support app didn't suggest there was a newer firmware so I didn't go looking. There is and it sorted all my issues. Now passing all memory tests, both windows and dell preboot diagnostics memory checks.
Sandman56
2 Posts
0
August 3rd, 2021 06:00
Thank you very much for the information on the HyperX Fury ram. I read all the threads pertaining to the Aurora R10 memory. With that information I decided to order the following ram: HyperX Fury Black 32GB 3466MHz DDR4 CL17 DIMM (Kit of 2) HX434C17FB4K2/32. I hope this is the right ram which I will find out after I install it later today. I will remove the OEM 16Gb stick and add the 2 sticks of HyperX Fury. I will post an update after I get the results and run Cpuid CPU-Z to obtain test results. Thank you again for the help.