@DarkKnights22: First time you do this, yes, please follow the manual. The fan is using short screws to mount to the radiator and there's no way to reach them. Full disassembly followed by the appropriate long screws to install the new fan. Just be careful not to pierce the radiator.
I'm going to come back later when I'm done getting over the NON-DELL RGB INSIDE THAT ALIENWARE THROUGH THOSE DOMINATORS RAMS!!! Where did you download such great RAMs? (sorry, becoming too much like those Reddit ppl).
@GTS81Is it possible to do PUSH-PULL fan on radiator without taking out liquid cooler on CPU? The liquid tubes are quite stiff and i'm afraid to bend it
GTS81
2 Intern
•
2.2K Posts
0
June 4th, 2020 20:00
DarkKnights22
7 Posts
0
June 3rd, 2020 00:00
Do I have to remove the whole thing, or is there an alternative method to just remove the fan?
r72019
6 Professor
•
5.3K Posts
0
June 3rd, 2020 20:00
Either remove the top, or the AIO cooler from the CPU.
DarkKnights22
7 Posts
0
June 4th, 2020 08:00
GTS81
2 Intern
•
2.2K Posts
0
June 4th, 2020 20:00
zoozooka
1 Rookie
•
36 Posts
0
June 5th, 2020 20:00
@GTS81Is it possible to do PUSH-PULL fan on radiator without taking out liquid cooler on CPU? The liquid tubes are quite stiff and i'm afraid to bend it
GTS81
2 Intern
•
2.2K Posts
0
June 5th, 2020 20:00
@zoozooka :
Very unlikely you'll be able to slip the top fan in through the top bracket.
I bent them this much: