Unsolved
4 Posts
0
564
August 4th, 2021 12:00
Aurora R11, failed to boot after BIOS update?
I saw that you are supposed to do the CMOS reset, but the PC booted up after I forced it to shut down.
Basically, it flashed the bios, restarted and the monitor didn't turn on. I forced it to shut down and booted it up again. The monitor still didn't turn on and the PC somehow restarted again and then finally the monitor turned on.
Should I do the CMOS reset still or it should be okay now?
No Events found!
Rabbitdude
2 Intern
•
509 Posts
0
August 4th, 2021 13:00
You should never shutdown the PC during the first boot of a bios flash. Yes do a CMOS reset
r72019
8 Professor
•
5.3K Posts
0
August 4th, 2021 20:00
Yes, that is normal. You have to let it sit at the black screen for a few minutes after running the BIOS update, it restarts, and takes some time at a black screen, before it loads up windows. Do not turn it off during this time period. As long as there is no flashing lights on the power button all is good.
If it is working fine now don't worry about it.