Unsolved
This post is more than 5 years old
2 Posts
0
916
February 8th, 2019 18:00
Aurora R7, issue with cpu pump
Hello all,
I was gifted a Corsair H60 to spruce up my new Aurora R7 but I can't find where to mount it. The top fan is over a black mesh cage that looks like the place it should go but the H60 radiator doesn't fit inside. I tried to jerryrig it by putting the corsair fan inside the cage and using 3" screws to hold the radiator in place where the old fan was hanging but the power supply interferes with the hoses. Am I missing something?
Thank you, Laat
No Events found!
Cass-Ole
8 Professor
•
1.9K Posts
•
9.6K Points
1
February 8th, 2019 20:00
Aurora R6 Disassembly: Liquid Cooling
PDF SrvcManual p.62 w/ prerequisites
Forum search Corsair H60
I don't own your PC, browse those til u get an answer
mp_108
2 Intern
•
175 Posts
0
February 9th, 2019 07:00
I did this, see link below. Also use the top fan fitted instead of the corsair one - they are interchangeable.
The oem fan pushes significantly more air. Obviously the trade off is that it will be noisier when running at 100% but it is better to have noise than a fried CPU, plus unless you are running prime95 max stress test, it is unlikely the fan will run flat out.