6 Professor

 • 

5.3K Posts

August 21st, 2020 06:00

Cool! Good to hear it cleared the pre-boot checks.

27 Posts

August 21st, 2020 07:00

@Anonymous This is about air cooled setup. I placed 2 fans on top of course no radiator there. Under 'radiator' in mentioned message I meant vrm heatsink, english is not my native language

27 Posts

March 11th, 2021 23:00

Upgraded to AIO, so now my R8 setup as below:

- Corsair H75, connected to SATA and PUMP_FAN (1 pin). CPU_FAN empty. Radiator perfectly fits the cage.

- 2 * Corsair ML 120 PRO - in sandwich for top pull/push for H75 radiator, connected to mb via Noctua Y-split connector to TOP_FAN (on photos below is ML120PRO LED white)

Front intake fans connected to mb as: Noctua low-noise adapter >> Noctua Y-split connector >> fans. (added low noise adapter as on max speed A12x25 fan is a bit loud...):

- 1 * Noctua 120mm NF A12x15 PWM (as my EVGA 3070 was too long to use 25mm fan)

- 1 * Noctua 120mm NF A12x25 PWM  (placed to upper part where originally I had HDD cage)

p.s. vrm heatsink looks now not good, as I bent it a bit when installing Thermalright AXP-100-Full Copper, but thats ok.

p.p.s. temps are perfect! both for CPU and GPU ))) no noise!

Some photos:

2021-03-07 16-48-41.JPG

 

2021-03-07 15-23-23.JPG2021-03-07 16-33-08.JPG2021-03-07 16-33-12.JPG2021-03-07 16-33-19.JPG2021-03-07 16-48-45.JPG2021-03-07 16-48-47.JPG

1 Rookie

 • 

32 Posts

April 7th, 2021 12:00

Nice!

No Events found!

Top