2 Intern

 • 

872 Posts

July 1st, 2017 07:00

does it look the same when you open BIOS Settings?

3 Apprentice

 • 

901 Posts

July 1st, 2017 12:00

Hi, thanks for your reply.

Yes it has the same gaps in the system BIOS screen which worry me now you have bought my attention to it, that probably means its a hardware failure! What do you think?

Do you know if it is possible to get these screen re-calibrated?

2 Intern

 • 

872 Posts

July 1st, 2017 12:00

that is not good. i hoped you say no.

if i understand it correctly, your Customer said it was fine when ´he got it but went bad short after. is that correct?

if yes, then it could be BIOS related. Power Drain, BIOS Update and BIOS Reset / Clear CMOS might help.

if all those Steps fail, then you have to give it back to Dell.

Edit:

actually Power Drain is the most promising Option. just remove the Battery and hold Power On Button for a Minute. then Boot again.

3 Apprentice

 • 

901 Posts

July 1st, 2017 23:00

I'll give it a try, hopefully it works otherwise I could be up for a new LCD panel or motherboard. I cannot give it back to Dell as it is out of warranty so really hoping I can fix it myself.

3 Apprentice

 • 

901 Posts

July 2nd, 2017 00:00

Just completed full power drain. (main battery, coin cell and AC power disconnected) And no change.

Do you know if I reprogram/change values in  LCD EDID EEPROM would it make a difference?

I know of people doing this with failed LCD panels, especially the Alienware 18 panels that died when windows 10 was first released (Win 10/Intel HD or NVIDIA drivers were re-writing the EDID in the LCD firmware)

2 Intern

 • 

872 Posts

July 2nd, 2017 01:00

i hoped it would be a BIOS Problem.

sorry, i have no Idea if Recalibrating would work or not. that Question could be only answered by Alienware Support Guys but they don't Post on Weekends.

3 Apprentice

 • 

901 Posts

July 7th, 2017 18:00

Bump

2 Intern

 • 

872 Posts

July 8th, 2017 06:00

yeah , sorry, the Thread got barried somehow. your Timing isn't great either because it's Weekend again. let's bump the Thread next Monday again.

i am still wondering, why don't you just send the Notebook back to the Manufacturer? i meen it's not Sellers Problem, right?

3 Apprentice

 • 

901 Posts

July 8th, 2017 15:00

Yep, I always seem to have bad timing

Returning laptop to manufacturer is not an option it has no warranty available so I have to fix this myself.

Something interesting that I have come across in the last few days while looking at different options to fix this is:

Dell charge $641AU for the upgrade from a 17inch 1080p screen to a 17inch 4K 2160p with tobi tracking.

AU Optronics is the 4K screen manufacturer (or one of them)

I can purchase the following from ebay sellers.

(New) AU Optronics 17inch 4K  (3840 x 2160) panel - $120AU delivered.

(New) Original Dell 4K LCD screen cable - $30AU delivered.

(New) Original Dell/Alienware Tobii tracking module and cable - $50AU delivered

(New) Alienware 17inch LCD Bezel with Tobii window $30AU - delivered

(New) Alienware 17inch LCD cover with Tobii bay $50 - delivered.

That's $240AU total for what Dell charges $641AU for, price would be cheaper if I used refurb/used parts instead of new.

Already ordered five x 4K panels (one for repair on this job and the rest for upgrades)

2 Intern

 • 

872 Posts

July 9th, 2017 02:00

AndrewSi wrote:

1. Returning laptop to manufacturer is not an option it has no warranty available so I have to fix this myself.

 

2. Dell charge $641AU for the upgrade from a 17inch 1080p screen to a 17inch 4K 2160p with tobi tracking.

[...]

That's $240AU total for what Dell charges $641AU for, price would be cheaper if I used refurb/used parts instead of new.

3. Already ordered five x 4K panels (one for repair on this job and the rest for upgrades)

1. ah, i get it now.

2. i believe when Upgrading from 1080p to 4K Screen the Motherboard needs to be replaced aswell. maybe the Board is included. but it would not surprise me if it's just the Screen and the Cables. Dell Prices are always high. i payed 65 euro for a Plastic Fan Holder for my Area 51. really nothing Special. just a Frame with 5 Holes for Screws.

3. good Idea. try to replace the Display. tell us how it goes.

Good Luck.

No Events found!

Top