Unsolved

This post is more than 5 years old

78895

April 25th, 2013 20:00

Accidentally Uninstalled Graphics Card?

alright so i think i accidently unistalled my graphics card or something.. So i went to Start > Computer right click > Properties > Device Manager > Display Adapter and went over my Raedon 7970 and accidently clicked uninstall.. Now my computer only runs the intel 4000 graphics card.

How do i get my raedon 7970 back?

Btw im on Alienwre m17xR4 with AMD 7970

it didnt come with a cd from graphhics card..

Thanks.

what ive tried so far..

i went and downloaded the drivers and installed them and that didn't work. i can still only select the intel graphics 4000

April 26th, 2013 22:00

Anyone please

April 27th, 2013 18:00

bump

7 Technologist

 • 

7.1K Posts

April 27th, 2013 19:00

Hi MustafaHadaKing,

I would advise you to uninstall the ‘catalyst control center’ & ‘Intel HD graphic drivers’ from ‘Programs and Features’ under the control panel and reinstall it in a sequence given below to get back the integrated and discrete video cards on the system.

Please follow the link below. When the page comes up please put in the service tag of your computer. Then go ahead and download the ‘Intel Graphics Driver’ first and then ‘AMD HD7970M 8.973 Win 7 64 Driver’ from Video section and install it in sequence , after selecting the operating system installed on your computer, from the link below.

http://dell.to/ZaQuel

Please let me know if this helps.

April 28th, 2013 17:00

thanks for the reply, but that did not work.

3 Posts

April 28th, 2013 21:00

I just accidentally did this and it turned into a bit of a mess. I uninstalled them, and then tried to install the new beta drivers but the driver installer wouldn't recognize my 7970m. So i went on to dells driver page and downloaded the original driver, and while it worked, it wasn't working exactly right and I had half the normal performance I used to have even after trying to install newer drivers than the ones from dell. I ended up doing a factory restore because my backup USB drive somehow got corrupted. After re installing everything the way I wanted it and updating to the newest drivers it works fine now. I would try just installing from dells page, but if that ends up not working doing a factory restore.

7 Technologist

 • 

7.1K Posts

April 29th, 2013 11:00

Hi MustafaHadaKing,

I would like to know the exact error message you are receiving when you try to install the AMD graphics driver.

2 Intern

 • 

835 Posts

April 29th, 2013 11:00

Hi MustafaHadaKing,

If re installing the driver didn't work, you can always restore the system back to a date when it was working fine:

How to run Windows® 7 System Restore in your Alienware™ computer 

April 30th, 2013 13:00

it installed fine but when i clicked catalyst control it wouldnt let me open it and said there's an error with the catalyst control. i dont remember the exact message but i guess ill have to try same process again and see what it is.

7 Technologist

 • 

7.1K Posts

May 1st, 2013 23:00

Hi MustafaHadaKing,

I would advise you to Re-flash the latest BIOS and then install the video drivers for your system.

Please follow the link below. When the page comes up please put in the service tag of your computer. Then go ahead and download the BIOS and ‘Intel Graphics Driver’ first and then ‘AMD HD7970M 8.973 Win 7 64 Driver’ from Video section and install it in sequence , after selecting the operating system installed on your computer, from the link below.

http://dell.to/ZaQuel

If the above step does not resolve the issue then I’d suggest that you run the diagnostics on the computer by following the steps mentioned below and check if there is any issue with the hardware on your system.

  1. Turn on or restart the computer.
  2. Immediately at the Dell logo screen, starting tapping the key once a second until the One Time Boot menu appears (if the computer boots to Windows turn the computer off and try again).
  3. At the One Time Boot menu, press the arrow key to highlight Diagnostics, PSA+ or Enter ePSA, then press to begin the hardware Diagnostics.
  4. Write down any error codes listed. Reply to us with the error codes.

Please let me know if this helps.

June 14th, 2013 12:00

hi, sorry for the late response but i tried what you said and it did not work. Also when i did the diagnostics it did not come with any errors.

June 14th, 2013 19:00

Hi Mustafahadaking,

If you go to the device manager, do you see a standard VGA adapter? Do you see something else listed under other tab?

June 15th, 2013 15:00

nope i don't see that. I see AMD Radeon HD 7970M & Intel(R) HD Graphics 4000

June 17th, 2013 14:00

That means the AMD driver was installed by windows. I would recommend you to uninstall the Catalyst Control Center from Programs and Features and install the latest driver from the manufacturer's website.

July 2nd, 2013 19:00

ive tried that and that didnt work

No Events found!

Top