I just installed my X51 R1 in a Hadron Hydro which is dimensionally similar but slightly taller (to accommodate a radiator for water cooling, which I didn't use). It was fairly easy to do. You will need a new slim SATA/Power cable for the DVD drive and either put a compatible connector on the case's power button/power led wires so that it mates to the daughter board or splice the original onto the leads. Other than that it is pretty much plug and play.
I went this route because I purchased a GTX970 and was having power issues with the original configuration.
thank you for this info; I want to do exactly what you did! could you please provide a link to a DVD drive cable and a compatible power button connector that would work? I haven't opened my x51 yet and I wanted to know exactly what I would need beforehand, thank you!
hoel6466
2 Posts
0
January 13th, 2015 11:00
I just installed my X51 R1 in a Hadron Hydro which is dimensionally similar but slightly taller (to accommodate a radiator for water cooling, which I didn't use). It was fairly easy to do. You will need a new slim SATA/Power cable for the DVD drive and either put a compatible connector on the case's power button/power led wires so that it mates to the daughter board or splice the original onto the leads. Other than that it is pretty much plug and play.
I went this route because I purchased a GTX970 and was having power issues with the original configuration.
Luc
tylertb
1 Message
0
January 17th, 2015 19:00
thank you for this info; I want to do exactly what you did! could you please provide a link to a DVD drive cable and a compatible power button connector that would work? I haven't opened my x51 yet and I wanted to know exactly what I would need beforehand, thank you!