Unsolved

This post is more than 5 years old

40036

March 10th, 2015 23:00

Yet another bricked MIO board - Alienware Aurora R4

Went through the extensive troubleshooting process and I guess my R4 MIO is bricked - fell into the trap, installed software from boxed CD.

Opened up and looking at part numbers to try and replace. V51MH seems to be what I need, but my actual MIO has a part number 23XP2????

Were there many different types? Thanks in advance,

Alienware Aurora R4 (Late 2011)
Service Tag:  < ADMIN NOTE: Service tag removed per privacy policy>

March 11th, 2015 14:00

Thanks for the response - what is the difference between 2JXP2 and V51MH boards (if any)?

10 Wizard

 • 

17.6K Posts

 • 

70.1K Points

March 11th, 2015 14:00

Even though there have been many different Dell Part Numbers for Aurora MIO-Boards over the years, there is really just 2 different Aurora MIO-Boards.

Here is an example 2010 selection.

2JXP2 - Aurora R1-x58 (Deimos)/Aurora R2 (Voltaire) ALX Master I/O Board
P0GVP - Aurora R1-x58 (Deimos)/Aurora R2 (Voltaire) non-ALX Master I/O Board

On a non-ALX version of the board, most header pin connectors and components for ALX functions are NOT soldered in. To CommandCenter is appears to be a non-ALX machine (no louver control or extra ALX lights)

These would also work in R3-R4, as well as newer R3-R4 ones will work in these older machines. Also, they must be for Auroras. Area-51 MIO-Boards are different.

10 Wizard

 • 

17.6K Posts

 • 

70.1K Points

March 11th, 2015 15:00

Thanks for the response - what is the difference between 2JXP2 and V51MH boards (if any)?

Only Dell knows, but don't assume used or surplus MIO-Boards are even described appropriately. Most vendors know little about them or have any way to check them.
What do YOU need ... Normal or ALX version? Also, what country are you in?

March 11th, 2015 18:00

I'm in New Zealand - I have a R4 (late 2011) ALX.

Thanks for your help!

10 Wizard

 • 

17.6K Posts

 • 

70.1K Points

March 12th, 2015 01:00

Aurora ALX model has servo-controlled movable louvers on top and extra lights ... this is what you have?

So, for Aurora ALX, only 2JXP2 will work.

Referencing ... I found this email from "DELL-Chris M" on 6-2012 

Call Dell Spare Parts 1-800-357-3355 and ask for the part number for prices and availability.

Area-51
604GC Master IO Panel ALX (Euro Compliant)
FDNW2 Master IO Panel Standard (Euro Compliant)
FWKNT Master IO Panel ALX
FMDKG Master IO Panel Standard

Aurora-R4
2JXP2 Master I/O Board ALX
V51MH Master I/O Board Standard

Aurora-R3
V51MH Master I/O board Standard

Aurora-R2
P0GVP Master I/O Board Standard

Aurora-R1
2JXP2 Master I/O Board ALX
P0GVP Master I/O Board Standard

10 Wizard

 • 

17.6K Posts

 • 

70.1K Points

March 12th, 2015 01:00

Thanks for the response - what is the difference between 2JXP2 and V51MH boards (if any)?

2JXP2 : what you need for Aurora ALX

V51MH : This will not work. This is only a "Standard" model, so the parts to control extra ALX functions will not be soldered-in. Also, in CommandCenter, the extra ALX features will not be presented.

0 events found

No Events found!

Top