Alright, so before I saw your reply, I did a clean install back to my HDD because I couldn't install Samsung's Drivers, and Samsung Magician wouldn't recognize the drive out of AHCI instead of RAID.
I'm in my clean install right now, and while the 950 Pro is detected in BIOS, its not seen in Device Manager or Disk Management. I want to format it then try to do a clean install on it as my boot drive. Where should I begin? I don't know how to format the drive its not visible in device manager or disk management. I also ran
1.)Should I install in AHCI, where Samsung's software and drivers recognize it properly? Last time I tried to Install in AHCI i kept getting an error about the Drive not being formatted properly.
2.) Should I do an F6 Intel RST install in RAID, where the drive seemed to function properly but I didn't have access to the drive in Samsung's software and could not install their drivers? I'm a bit of a noob when it comes to all of this stuff.
3.) Should I see if the drive is detected in Cloning software and simply clone this Install of windows?
4.)I ran Diskpart in command prompt, then list disk, and only the HDD showed up.
Eimy_B
4 Operator
•
4.4K Posts
0
September 22nd, 2016 13:00
Hi,
Yes, you need to enter the BIOS, then go to the BOOT tab and change the Boot Option Priorities.
Let me know if you need something else!
SADBOI
2 Posts
0
September 23rd, 2016 11:00
Alright, so before I saw your reply, I did a clean install back to my HDD because I couldn't install Samsung's Drivers, and Samsung Magician wouldn't recognize the drive out of AHCI instead of RAID.
I'm in my clean install right now, and while the 950 Pro is detected in BIOS, its not seen in Device Manager or Disk Management. I want to format it then try to do a clean install on it as my boot drive. Where should I begin? I don't know how to format the drive its not visible in device manager or disk management. I also ran
1.)Should I install in AHCI, where Samsung's software and drivers recognize it properly? Last time I tried to Install in AHCI i kept getting an error about the Drive not being formatted properly.
2.) Should I do an F6 Intel RST install in RAID, where the drive seemed to function properly but I didn't have access to the drive in Samsung's software and could not install their drivers? I'm a bit of a noob when it comes to all of this stuff.
3.) Should I see if the drive is detected in Cloning software and simply clone this Install of windows?
4.)I ran Diskpart in command prompt, then list disk, and only the HDD showed up.
I'm at a bit of a loss!
Eimy_B
4 Operator
•
4.4K Posts
0
October 5th, 2016 13:00
This might help you:
en.community.dell.com/.../19989934