Unsolved
6 Posts
0
623
March 9th, 2021 13:00
Area-51m R1, lags due 3DMark
The laptop passes all tests (3DMark various modes, Furmark, Aida64, etc.), there are no visible problems in games either.
But with the 3DMark test, the CPU frequency very often go too low, and I see lags during the test. The test ends, the result seems to be good, but the picture clearly indicates a problem.
Any manipulations with the processor do not give any sense, I tried to put the frequencies lower, undervolting and without, there is no difference.
Attached a screenshot with the indicators.
No Events found!
crimsom
7 Technologist
•
6.1K Posts
0
March 9th, 2021 23:00
Hi @ma3atr0n this Area-51m could be a low specification, and unable to give a good 3D Mark performance.
Hint: Use shift + windows +s key combination to create a good image of the screen's content.
ma3atr0n
6 Posts
0
March 10th, 2021 00:00
This is 9700K + RTX 2070, i have another 51m with same specification, and 3dmark work smooth.
crimsom
7 Technologist
•
6.1K Posts
0
March 10th, 2021 00:00
Hi @ma3atr0n does the F12 ePSA Diagnostics test reveal a GPU hardware fault?
ma3atr0n
6 Posts
0
March 10th, 2021 01:00
F12 ePSA Diagnostics test with no error, all is ok.
crimsom
7 Technologist
•
6.1K Posts
0
March 10th, 2021 02:00
Hi @ma3atr0n does Error Checking OS(C:) Scan drive, find and fix any file system errors?
ma3atr0n
6 Posts
0
March 10th, 2021 05:00
No, there are no errors.
I tried to change the SSD and RAM, it didn't help.
crimsom
7 Technologist
•
6.1K Posts
0
March 10th, 2021 10:00
Hi @ma3atr0n you have now checked hardware and file systems. There must be a hardware or application settings difference between these two Area-51M laptops. Unfortunately, this requires a manual check and could be a long activity. You might get lucky with an internet search and find an article on how to improve Area-51m 3D Mark performance, which will reveal the optimum settings to narrow your manual check.