CLARiiON
Posts
Unsolved
This post is more than 5 years old
14 Posts
0
2261
December 3rd, 2010 07:00
Flare 30 Upgrade.
Guys,
I have to upgrade Flare from 29 to 30. I need a procedure to upgrade it.
Can you pls help me??
Thank you..
Responses(21)
No Events found!
Rainer_EMC
8.6K Posts
0
December 3rd, 2010 08:00
What model do you have?
Are you a partner or a end customer?
kayan1
14 Posts
0
December 3rd, 2010 11:00
I am a partner.
kayan1
14 Posts
0
December 3rd, 2010 11:00
Model is cx-120.
Rainer_EMC
8.6K Posts
0
December 3rd, 2010 13:00
then I would suggest to use the procedure generator
Rainer_EMC
8.6K Posts
0
December 3rd, 2010 13:00
for a pure Clariion CX you will get more and better answers in the Clariion section of the SUPPORT forum
RFritz11
244 Posts
0
December 6th, 2010 11:00
Hi,
I've moved this discussion thread to the CLARiiON Support Forum, as the best place to get assistance with the issue described.
Thanks.
cornwk1
100 Posts
0
December 6th, 2010 11:00
Kayan,
I'm moving this discussion thread over into the CLARiiON Support Forum, because I think this is the best place for you to get assistance with the issue you described. If you have any trouble accessing it, please let me know.
Kris
Quincy561
1.3K Posts
0
December 16th, 2010 14:00
I have the same question. The service taskbar won't let me go from 29 to 30. Searching here and powerlink left me feeling empty. I'm an EMC employee and this is in a lab.
John
kenn2347
542 Posts
0
December 16th, 2010 14:00
You may need to use the USM(unisphere service manager) to do the upgrade.
You might as well replace the old NST with the new USM anyway since as far as i can see, it is backward compitable.
Quincy561
1.3K Posts
0
December 16th, 2010 14:00
Ok, where do I find that?
Quincy561
1.3K Posts
0
December 16th, 2010 14:00
Well the old service taskbar told me it couldn't update to 29. Seems it would only let me do an in family update.
jmarshall1
25 Posts
0
December 16th, 2010 14:00
There are some issues using USM if your not already on flare 30. It works but you'll get some hangups and the the final process continues to run even though the process is done.
Storagesavvy
474 Posts
0
December 16th, 2010 14:00
FYI, best practice right now is to upgrade to Flare 29, patch 14 first, then to the latest version of Flare 30. There were some issues, largely resolved now, with upgrades from earlier Flare releases to Flare 30
kenn2347
542 Posts
0
December 16th, 2010 14:00
As a EMC employee, im not sure.
As a partner, i go to EMC Service Partner Web>Software>Unisphere> and it is at the bottom.
Quincy561
1.3K Posts
0
December 16th, 2010 14:00
Seems I've found it on PowerLink. Thanks.