Unsolved
This post is more than 5 years old
2 Posts
0
622
LUN information not updated in storage.
Hi,
We have clarrion storage.LUN assigned to server.From server LUNs are accessible.We have not rebooted the server.But in storage side no information updated.(Device file/file system details).I have created file systems.No issue.
Storage:Clarrion CX380
HP-UX-11.23
HP Integrity server 2660.
Regards,
PVM
Stephanie_P
180 Posts
0
June 22nd, 2011 06:00
Hello PVM,
The team is going to move this thread to the Support Forums Community where your question can be addressed.
Thanks,
Stephanie
RFritz11
244 Posts
0
June 22nd, 2011 08:00
Hello, We've moved your question CLARiiON Support Forum where you should receive prompt assistance. Thanks.
Kumar_A
727 Posts
0
June 22nd, 2011 10:00
Have you installed the host agent on your host. Host agents push the host side information to the storage system. The information will then be available in the GUI.
kelleg
4.5K Posts
0
June 22nd, 2011 11:00
Please see Solution emc254967 - this talks about the use of the EMC Navisphere Host Agent - you need to install this on the host in order for host data to be uploaded to the array.
Depending on the version of flare running on the array, you will need either the Navipshere Host Agent for HP-UX for the Unisphere Host Agent.
Home > Support > Software Downloads and Licensing > Downloads J-O > Navisphere Server Software
Home > Support > Software Downloads and Licensing > Downloads T-Z > Unisphere Server Software
glem