Minor Flare30 Upgrade breaks NAVISECCLI

EMC recently upgraded Flare 30 in our CX4-480 from 04.30.000.5.509 to 04.30.000.5.511.

Everything was working ok until we rebooted our HP-UX 11.11 host.

Now naviseccli returns the following error:

ERROR: Apr 15, 2011 2:13:29 AM hpuxnode 102718 ERROR: The CLARiiON at IP address 10.10.10.225, 10.10.10.227
requires that a security certificate be installed.
Please run the command naviseccli getagent and install the certificate.

Is there an easy way to force the certificate to be re-installed?

Also the certificate in the Unisphere GUI on the CX4 is showing a Yellow triangle next to the phrase "The certificate is valid".

Is it valid?

Do certificates need to be regenrated when a minor Flare 30 upgrade is applied?

We also run Replication Manager with this CX4 so I am not convinced that just re-installing Naviagent on the HPUX host will fix the problem.

Trying the workaround from the powerlink site:

2.     Run the navisecCLI getagent command and select 2to accept and store the certificate. This must be done to both SP's

The option "2" does not appear after the getagent command is sent!!

Where should I expect to see the opportunity to "select 2"??