Navisphere CLI 7.33.0.0.15

Thanks, found it

where can I download navissecli  for vnx2s ?

Would someone be able to answer this post please?

Re: NaviCLI-Linux-64-x86-en_US-7.33.8.1.19-1 support.

You may also be able to find them here:

https://support.emc.com/search/?text=navicli&product_id=36656&resource=ST&searchLang=en_US

glen

You should be able to get it here:

https://download.emc.com/downloads/DL30833_Navisphere_CLI_(Linux_x86)_7.33.8.1.19.rpm?source=OLS

glen

The attached document from the E-Lab site is called the "Simple Support Matrix" - there is one for most of the products. As CLI is part of the release for the array (for example the VNX2), the software for the array such as CLI or USM, is updated at the time that FLare is updated. To see if a particular package is supported by which hosts, you would go to the E-Lab site (off the Support by Product page) and then to the Simple Support Matrix page and select the product - VMAX, VNX2, etc.

As the latest release of Naviseccli came out with the latest release of Flare (33.119), then the VNX2 matrix would show which hosts are supported, and by default, those hosts would also support the other software (CLI, USM, etc). Table 1 lists the operating systems supported. Look for the Redhat version you're interested in.

glen

Thank you.