This post is more than 5 years old
60 Posts
0
1183
unisphere to manage all the clariion boxes
Hello All,
can we use unisphere to manage all our clariion boxes from a single pane?can we use unispshere instead of navisphere?
Any help.....
Thanks.
This post is more than 5 years old
60 Posts
0
1183
Hello All,
can we use unisphere to manage all our clariion boxes from a single pane?can we use unispshere instead of navisphere?
Any help.....
Thanks.
Top
rupal1
433 Posts
0
May 18th, 2011 10:00
Hi Raju,
Yes the Clariion can be used to manage all the arrays in a domain. The only condition that needs to be met is that the CX4 with the release 30 should be the master in this domain and then we can manage all the array in this domain through Unisphere.
Rupal
kelleg
4.5K Posts
1
May 16th, 2011 15:00
Yes - the version for the CX4 - Release 30 - Unisphere 1.0.5.xx - see the Unisphere User's guide - just like Navisphere
glen
Raju_auh
60 Posts
0
May 17th, 2011 04:00
we have CX300 & CX500 with release 26.will it support?
kelleg
4.5K Posts
1
May 17th, 2011 06:00
Yes - see page 3 for the list of supported versions - release notes will always contain the list of supported versions of flare - always check there to be sure of the support
Home > Support > Technical Documentation and Advisories > Software ~ T-Z ~ Documentation > Unisphere > Release Notes
Unisphere for Block Release Notes 1.0 A05
glen
Message was edited by: kelleg
Raju_auh
60 Posts
0
May 18th, 2011 21:00
Hello Rupal,
Thanks a lot for the information..
Kumar_A
727 Posts
0
May 19th, 2011 06:00
The highest rev system does not HAVE to be the master. The master can be any system in the domain. The user has to point to the highest rev system to MANAGE all systems. What system you manage from and what is the master system in the domain are mutually exclusive.
SKT2
1.3K Posts
0
June 22nd, 2011 03:00
Can you share the doc which explains/described it? I have a 4.29 system recently added in the env, but other members in the domain are either 4.28 or 3.26.