Unsolved
This post is more than 5 years old
20 Posts
0
692
Migration NSX -> VG2/VG8
Hi
I am at planing for migration of 50TB data of the NSX to VG2 and VG8. On the NSX runs several vdm's. The largest filesystem is 5TB.
What for migration procedures used you?
I can't use EMCCopy, takes to long and various filesystem have more as 255 characters. I do not have Cellera Replicator
You already with the backup/restore variant a migration accomplished?
After some test in the lab, i found out after the restore of a filesystem that local group are not carried forward to the new vdm, although i used the tool lgdup...
What's about the shares? how can i export the shares on the source vdm and import on the destination vdm?
Any ideas, how i can quick migrate the data?
Thank for ideas or proposals for solution
bir
Peter_EMC
674 Posts
1
July 6th, 2011 07:00
As mentioned by Rainer here:
https://community.emc.com/thread/122777?tstart=0
there is a temporary replicator licence available.
Rainer_EMC
8.6K Posts
1
July 6th, 2011 07:00
Please look at Powerlink for the Celerra to VNX migration white paper and get (free of charge) Replicator licenses for migration
Rainer
bir1
20 Posts
0
July 8th, 2011 04:00
Hi Peter & Rainer
Thank you for the quick response. I look with our emc sales to get a license.
bir