This post is more than 5 years old
45 Posts
0
1123
Regrading allocating RAID-5 devices from DMX-4 to celerra
Hi,
I just want to know can we allocate RAID-5 devices from DMX-4 to celerra if we can then to which storage pool it will go? if it will not go to any pool can we create a user defined pool with RAID-5 devices?
Thanks
I just want to know can we allocate RAID-5 devices from DMX-4 to celerra if we can then to which storage pool it will go? if it will not go to any pool can we create a user defined pool with RAID-5 devices?
Thanks
nandas
1.5K Posts
0
April 2nd, 2009 11:00
server_devconfig server_x -list-scsi -disk
server_devconfig server_x -probe -scsi -disk
server_devconfig server_x -create -scsi -disk
server_devconfig server_x -list -scsi -disk
In the two list commands, you 'll see the differences in the total disks presented to Celerra. nas_disk -list command will show you the disks.
Thanks,
Sandip
dynamox
2 Intern
2 Intern
•
20.4K Posts
1
April 2nd, 2009 11:00
raja4
45 Posts
0
April 2nd, 2009 11:00
Thanks
raja4
45 Posts
0
April 2nd, 2009 11:00
dynamox
2 Intern
2 Intern
•
20.4K Posts
1
April 2nd, 2009 11:00
nandas
1.5K Posts
0
April 2nd, 2009 12:00
You can add those devices which are showing not used to any user defined pool. Please refer to the "Managing Celerra Volumes and file systems" document for more details.
Thanks,
Sandip
raja4
45 Posts
0
April 3rd, 2009 06:00
nandas
1.5K Posts
0
April 3rd, 2009 07:00
Thanks,
Sandip