This post is more than 5 years old
12 Posts
0
1961
ISCSI BRIDGE (tl24iscsixsas 1gb iscsi) missing IP address
Hello,
I have a trouble with my TL2000 ISCSI/SAS bridge,
1- Previous owner had configured an IP on it before then it was not being used for long time and he couldn't remember it
2-I did a factory reset for the TL so I could try the default IP "10.10.10.10"
3- I set an IP address for my laptop (10.10.10.11, 255.255.255.0) and I connected my CAT5e cable on the Ethernet port next to the sas connection on the ISCSI Bridge to ping 10.10.10.10 but it didn't work. I also try to access it through http://10.10.10.10/S0/login/ but also it didn't work.
now I need to know how can I get the iSCSI IP address to get it to work ..
AliAttwa
12 Posts
1
June 6th, 2017 09:00
Sam,
Now I have the challenge code to reset the password : JM0PZ29DOM7
DELL-Sam L
Moderator
Moderator
•
6.9K Posts
1
June 6th, 2017 07:00
Hello AliAttwa,
When you are connect to the left NIC port on your iSCSI bridge are there any link lights? Also have you tried to reseat your iSCSI bridge in your TL? Last on the server that your TL is connected to was there any previous iSCSI information or no?
Please let us know if you have any other questions.
AliAttwa
12 Posts
0
June 6th, 2017 09:00
Hello SAM,
I could get the IP address but the password had been changed. I tried admin but not working.
please advise.
thanks..
DELL-Sam L
Moderator
Moderator
•
6.9K Posts
1
June 6th, 2017 10:00
Hello AliAttwa,
I will send you a private message to the email address that you included in your profile with your passkey as I don't want to post it publicly.
Please let us know if you have any other questions.
AliAttwa
12 Posts
0
June 6th, 2017 10:00
Sam,
Now I have the challenge code to reset the password : JM0PZ29DOM7
AliAttwa
12 Posts
0
June 6th, 2017 11:00
Thanks SAM for your response.
I need to reset another code please : RD4M8X5D2QD