Unsolved
This post is more than 5 years old
57 Posts
0
1493
Storage Manager 2016 R3.20 and date/time on performance graphs
We are running Dell Storage Manager 2016 R3.20 (build 16.3.20.31).
We've configured our SC5020 time settings to use an NTP server: au.pool.ntp.org
Date/time on the SC5020 is correct and is in the right timezone (we are GMT+10).
When I look at performance graphs in the IO Usage tab Storage Manager, the date/time axis along the bottom of the graphs is showing GMT instead of GMT+10, so everything is 10 hours behind.
Question: is there any way to change these displays to show the correct local date/time? If there isn't, is this a bug that needs fixing?
DELL-Sam L
Moderator
Moderator
•
6.9K Posts
0
April 17th, 2018 13:00
Hello FrostyAtCBM,
I would call in & open a support case for this issue. I was able to try this in our lab and it is showing the correct time on our logs when I pull them. When you call in make sure that you have done a phone home log so that we can review it & get that issue fix for you.
Please let us know if you have any other questions.
FrostyAtCBM
57 Posts
0
April 17th, 2018 21:00
Thanks Sam,
I will re-check everything, then log a support ticket.
Cheers,
Steve
DELL-Bob Mi
230 Posts
0
April 29th, 2018 17:00
I have seen this before when someone was using a DSM Virtual Appliance. The time setting was GMT in the command line. If this is a Virtual Machine verify the time is set to synch with NTP from the ESX host.