Unsolved
This post is more than 5 years old
15 Posts
0
8135
Using non-Dell SSDs in an MD3200i (or any other Dell SAN)
I know that servers with a PERC H700 can now use non-Dell SSDs if the PERC's firmware is upgraded. But can I use non-Dell SSDs in an MD3200i with a similar firmware upgrade?
If it's not possible with an MD3200i, which Dell iSCSI SANs or NAS devices can use non-Dell SSDs?
I'd like to keep cost to a minimum. We only need about 1TB storage initially over 12 bays.
I'm also considering using StarWind to turn PowerEdge servers into SANs that will allow me to use non-Dell SSDs. Anyone here care to comment on their experience with this scenario?
DELL-Kenny K
685 Posts
1
April 25th, 2012 17:00
With our Power Vault line of systems they will not accept non-Dell drives. When you try and use non-Dell drives in the 3200i they will flash a couple times and will be marked as Not Supported. Unfortunately we do not have a utility that you can use that will allow you update them to be useable in the systems. Let me know if you have any other questions.