Unsolved
This post is more than 5 years old
2 Posts
0
780
EMC DD160 VTL Buffer size and block size
Hello,
I'm setting up a DD160 to work as VTL for Symantec Backup Exec.
The DD160 and the backup server are connected via FC.
Symantec Backup Exec offer 2 parameters, block size and buffer size, for each virtual tape drive (total 4), I believe these parameters can influence the backup performance.
Default values is 64KB for both.
Max value for block size is 512KB
Max value for buffer size is 1MB.
To get the best performance i would like to know, what's the highest reasonable value supported by the DD160 for these parameters?
Thanks.
gm_f
2 Posts
0
April 27th, 2015 07:00
Hi,
Ok, moved to Data Domain Support Forum
Thanks
GM
Rajneeshkv
127 Posts
0
April 27th, 2015 07:00
Hi,
Consider moving this discussion as it is to a more relevant product or Support Community for better visibility and more SME's answers. If you cant find a relevant community, move it to the General topics community General Topics. To move the discussion, click on the 'Move' link on the top right of the page under the 'Actions' widget.
Raj