Unsolved
This post is more than 5 years old
743 Posts
0
2602
More detailed alerts from m1000e Chassis
Hello,
I occasionally get the following generic alerts from our m1000e chassis (we have 44 of them).
Is there a way to get the alerts to be more specific in what is wrong?
Thx
John Bradshaw
DELL-Shivendra K
685 Posts
0
October 29th, 2017 20:00
Hi John,
Thanks for the query.
You will have to enable the SNMP alerts on the chassis, similar to our discussion about servers on below thread.
en.community.dell.com/.../20021423
bradje1
743 Posts
0
October 31st, 2017 17:00
Hi,
When a Test SNMP alert is sent to the IP of the OME server, where will I see that alert in OME when it arrives? Should it just be on the Home Page, under Alerts/Normal?
Do I need SNMP configured on the OME server?
Thx,
JB
DELL-Shivendra K
685 Posts
0
November 1st, 2017 21:00
You need to have Windows SNMP Trap service configured and running on OME server, before you start with OME, to receive any SNMP traps.
Traps will show up on home portal, and, with device details in Devices portal, and, in Alerts page under Manage section.
bradje1
743 Posts
0
November 2nd, 2017 15:00
Thx Shivendra.
With the SNMP Trap service there is not a lot to configure. I gather that it just needs to be running. Is that correct?
JB
DELL-Shivendra K
685 Posts
0
November 3rd, 2017 01:00
Yes, on OME server it has to be running with local account. On target chassis you need to configure SNMP traps to reach OME.