Unsolved
This post is more than 5 years old
1 Rookie
•
120 Posts
0
17097
September 14th, 2015 02:00
AMD HD4600 Graphics Card and Catalyst Control Centre Under WIN XP MCE
I am trying to find a version of Catalyst Control Centre that will run on an old Dell Dimension 9150 using an ATI Radeon HD4600 Series Graphics Card under WIN XP MCE 32 bit.
I need to be able to adjust the overscan / underscan settings when using HDMI to HDMI.
The only versions of CCC that I have found so far install without error but will not run to enable access to the CCC menus.
Any help appreciated.
No Events found!
speedstep
11 Legend
•
47K Posts
1
September 14th, 2015 07:00
4600 cards or any Radeon below HD5000 series can only use the legacy Catalyst drivers.
The auto detect utility etc will not run on legacy card.
CCC is a DOT NET application.
This means you need to install dotnet 4.0 and download directx june 2010 and any windows updates.
http://www.microsoft.com/en-us/download/details.aspx?id=17718
http://www.microsoft.com/en-us/download/details.aspx?id=8109
BEFORE trying to instlall the legacy driver. You download the DirectxPatch and extract TO A FOLDER and then run DXsetup.exe from the extracted files.
AMD does not allow you to hotlink directly to the driver.
You have to manually select it and choose 32 bit XP.
http://support.amd.com/en-us/download
http://support.amd.com/en-us/download/desktop/legacy?product=legacy2&os=Windows%20XP%20Media%20Center%20Edition
Zippy42
1 Rookie
•
120 Posts
0
September 14th, 2015 12:00
Brilliant as always - worked perfectly.
Thank you