This post is more than 5 years old
1 Rookie
•
24 Posts
0
49195
January 6th, 2017 13:00
Alert! Front I/O Cable Failure
I recently purchased a Optiplex 790 SFF and I Thermaltake MiniTower. I moved all my hardware into the the Thernaltake to make expansions to my system at a later date. The 790 has 4 USB's and audio I/O on the front but the Thermaltake doesn't so I am not using the connection on the motherboard (Dell Inc. 0J3C2F). I am now getting an error: "Alert! Front I/O Cable Failure" every time I boot my system.
Is there a way to turn this off or skip it from checking to see if this is plugged in?
Any help would be great.
No Events found!
ejn63
9 Legend
•
87.5K Posts
0
January 6th, 2017 13:00
The test/error cannot be disabled. The only way to remove it is to reconnect the cable to the original front panel.
mcoomer146
1 Rookie
•
24 Posts
1
January 6th, 2017 13:00
That is annoying. There should be a setting built into the BIOS to by pass the check or disable it. Anyway, thanks for the info!