Hi. Thanks for responding so quickly. I have seen that heatsink and i know which one it is. The heatsink that is in the Optiplex that i upgraded is the heatsink and shroud JN738. I will order the R6852 today.
I guess it depends on the Height of the shroud. Is yours a square or tall Rectangle?
I am not Dell Engineering and I do not have parts lists to go By.
H9073 Is the Tower Aluminum HS in my 620. I am guessing that the 210 and the 745 and 755 Tower use the same mounting. Note the 6 holes in the Top for the Copper Heatpipe version to fit.
Is the 210L a DESKTOP not a tower? If so these tall ones would fit but you would never close the cover again.
Well the height is the same as the J7109 but im sure i can make the D7931 work with the fan shroud. Just need to use my creative skills and make the fan shroud extend downward to the shorter heatsink bracket. Nothing major. Ill get some ABS plastic and extend it to work. You have been a great help and im sure it will work out just fine. I already ordered the D7931 so i will make it work.
Yes it is a tower. It has the the heatsink in your picture. I ordered the D7931 for it yesterday, not thinking about the height of the heatsink. It will close just fine. It has an oversized case, so im not worried either way.
Well I installed the D7931 and even though it is shorter than the J7109, I figured it would work. It didnt. Well now Im going to buy the J9761 heatsink and shroud. After this, my problem should be solved.
speedstep
9 Legend
•
47K Posts
0
May 8th, 2012 10:00
Hotter cpus require the Copper Heatpipe performance heatsink not the cheap aluminum extrusion heatsink.
Dell R6852 OptiPlex 210L Heatsink Assembly
Dell D7931 R6852
The one you have now is Dell OptiPlex 210L CPU Heatsink and Shroud, Dell ND992
edagger74
6 Posts
0
May 8th, 2012 10:00
Hi. Thanks for responding so quickly. I have seen that heatsink and i know which one it is. The heatsink that is in the Optiplex that i upgraded is the heatsink and shroud JN738. I will order the R6852 today.
edagger74
6 Posts
0
May 8th, 2012 12:00
So then the R6852 wont work?
speedstep
9 Legend
•
47K Posts
0
May 8th, 2012 12:00
JN378 looks like it is the tall Tower Heatsink Shroud.
The copper replacement would be something like.
Dell J9761
Dell J9761 Dimension E520 OptiPlex 745 GX620 Heatsink & Shroud
speedstep
9 Legend
•
47K Posts
0
May 9th, 2012 07:00
I guess it depends on the Height of the shroud. Is yours a square or tall Rectangle?
I am not Dell Engineering and I do not have parts lists to go By.
H9073 Is the Tower Aluminum HS in my 620. I am guessing that the 210 and the 745 and 755 Tower use
the same mounting. Note the 6 holes in the Top for the Copper Heatpipe version to fit.
Is the 210L a DESKTOP not a tower? If so these tall ones would fit but you would never close the cover again.
:emotion-4:
edagger74
6 Posts
0
May 9th, 2012 07:00
Well the height is the same as the J7109 but im sure i can make the D7931 work with the fan shroud. Just need to use my creative skills and make the fan shroud extend downward to the shorter heatsink bracket. Nothing major. Ill get some ABS plastic and extend it to work. You have been a great help and im sure it will work out just fine. I already ordered the D7931 so i will make it work.
edagger74
6 Posts
0
May 9th, 2012 08:00
Yes it is a tower. It has the the heatsink in your picture. I ordered the D7931 for it yesterday, not thinking about the height of the heatsink. It will close just fine. It has an oversized case, so im not worried either way.
edagger74
6 Posts
0
May 12th, 2012 06:00
Well I installed the D7931 and even though it is shorter than the J7109, I figured it would work. It didnt. Well now Im going to buy the J9761 heatsink and shroud. After this, my problem should be solved.