Unsolved
This post is more than 5 years old
5 Practitioner
•
274.2K Posts
0
1623
Dell Vostro 200 not starting
I have a dell vostro 200 pc.I got a problem with it turn on and off automatically and have a yellow light on power button.I disconnect all cables and reconnect but the problem is not fixed.please tell me a solution.Thanks in advance!
DELL-Chris M
Community Manager
Community Manager
•
54.2K Posts
0
October 10th, 2016 09:00
What hardware changes did you make to the 2007 Vostro 200 prior to the issue?
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
October 10th, 2016 17:00
I does not make any hardware changes. The system was going alright in the night I shut down it properly but I do not turn off power. In the morning it does not starting. From the picture I think 3rd one is issue to my pc.(Steady Amber)
DELL-Chris M
Community Manager
Community Manager
•
54.2K Posts
0
October 11th, 2016 07:00
* Turn the system off
* Disconnect the power cable from the rear of the system
* Press and hold in the power button for 30 seconds
* Reconnect the power cable
* Attempt to turn the system on
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
October 12th, 2016 00:00
I tried all these things but the system is not starting.It is still starting and turning off automatically with yellow light on power button.
DELL-Chris M
Community Manager
Community Manager
•
54.2K Posts
0
October 12th, 2016 08:00
* Power off
* Disconnect the power cable from the system
* Open the case cover
* Disconnect/reconnect every cable and plug you see
* Close the cover
* Reconnect the power cable
* Try to power the system on. If still no go, then some internal part is defective
Remove all memory and cards. Attempt to power on. Hopefully you will get some beep codes. Then add the memory back in. Attempt to power on. etc.
draco99
14 Posts
0
December 11th, 2016 01:00
Sometimes this mobo (it's in the Vostro 200, 400 and the Inspiron 530, 530s) needs to have the following procedure performed: unplug the power cord; press and hold the power button for 30 seconds; plug in the power cord; try to boot again. Otherwise, Chris has the right approach.