Have you tried hitting the "Cancel" button, and if so what was the result?
If the computer requires this file during Windows setup, I would imagine that Dell would normally have incorporated it into the OS installation disk that was shipped with the computer. Is that the CD you are using? If so, the CD must either be defective or the file was somehow omitted from the CD that was shipped. You might want to try asking for another Windows XP installation CD based on the disk you have being defective.
To get a replacement disk you must either contact Technical Support and explain the problem, or if you live in the U.S. you can try using this form: Dell Replacement CD.
Have you tried hitting the "Cancel" button, and if so what was the result?
If the computer requires this file during Windows setup, I would imagine that Dell would normally have incorporated it into the OS installation disk that was shipped with the computer. Is that the CD you are using? If so, the CD must either be defective or the file was somehow omitted from the CD that was shipped. You might want to try asking for another Windows XP installation CD based on the disk you have being defective.
To get a replacement disk you must either contact Technical Support and explain the problem, or if you live in the U.S. you can try using this form: Dell Replacement CD.
Unfortunately by the time I get to this screen my mouse and keyboard aren't working so I can't get to the cancel button. These are Dell provided disks. Trying to get replacement is my next step. Thank for the link!
You're welcome, but you might want to wait until you've tried the replacement disk to thank me. If the new CD works no better than the old one you might need to learn about slipstreaming. If you Google "nLite" you should find a page that describes that program as well as some helpful hints about incorporating various drivers into an installation CD.
Ok i had the exact same issue and this is how i worked it out.
1. copy the hdaudbus.sys (548 KB for my case) from another computer or CD to any CD. ( I Got it from my Windows Vista laptop).
2. When that message appears just insert this CD with hdaudbus.sys file. It takes a while (10 mins in my case) to move ahead. But it does move ahead!!!
Here's a copy of the file i used (Zipped) just in case.
This is strange. I have an E510 and have never needed or even got that message. I don't recall any other E510/5150 model user reporting this problem on this forum.
The E510 uses the SigmaTel integrated audio and Dell SigmaTel driver,not a Microsoft driver.
How did you do the manual reinstall? The correct and required sequence, after reformatting the C drive is (1) Install Windows (2) Install Dell Desktop System Software (3) Install Intel (motherboard) chipset drivers (4) Install Device Drives including Video, Dell SigmaTel audio, ethernet, etc.
You need to specificlly use the Dell SigmaTel driver for the audio, non Dell drivers (or later IDT drivers) will either not work or not work properly. SigmaTel is now called IDT.
jackshack
6.4K Posts
0
August 28th, 2009 11:00
Have you tried hitting the "Cancel" button, and if so what was the result?
If the computer requires this file during Windows setup, I would imagine that Dell would normally have incorporated it into the OS installation disk that was shipped with the computer. Is that the CD you are using? If so, the CD must either be defective or the file was somehow omitted from the CD that was shipped. You might want to try asking for another Windows XP installation CD based on the disk you have being defective.
To get a replacement disk you must either contact Technical Support and explain the problem, or if you live in the U.S. you can try using this form: Dell Replacement CD.
NikkiM525
4 Posts
0
August 28th, 2009 11:00
Unfortunately by the time I get to this screen my mouse and keyboard aren't working so I can't get to the cancel button. These are Dell provided disks. Trying to get replacement is my next step. Thank for the link!
jackshack
6.4K Posts
0
August 28th, 2009 12:00
You're welcome, but you might want to wait until you've tried the replacement disk to thank me. If the new CD works no better than the old one you might need to learn about slipstreaming. If you Google "nLite" you should find a page that describes that program as well as some helpful hints about incorporating various drivers into an installation CD.
Best of luck to you.
sujit_kumar
1 Message
0
August 2nd, 2010 22:00
Ok i had the exact same issue and this is how i worked it out.
1. copy the hdaudbus.sys (548 KB for my case) from another computer or CD to any CD. ( I Got it from my Windows Vista laptop).
2. When that message appears just insert this CD with hdaudbus.sys file. It takes a while (10 mins in my case) to move ahead. But it does move ahead!!!
Here's a copy of the file i used (Zipped) just in case.
http://www.megaupload.com/?d=EK58YBQC
fireberd
9 Legend
•
33.4K Posts
0
August 3rd, 2010 04:00
This is strange. I have an E510 and have never needed or even got that message. I don't recall any other E510/5150 model user reporting this problem on this forum.
The E510 uses the SigmaTel integrated audio and Dell SigmaTel driver,not a Microsoft driver.
How did you do the manual reinstall? The correct and required sequence, after reformatting the C drive is (1) Install Windows (2) Install Dell Desktop System Software (3) Install Intel (motherboard) chipset drivers (4) Install Device Drives including Video, Dell SigmaTel audio, ethernet, etc.
You need to specificlly use the Dell SigmaTel driver for the audio, non Dell drivers (or later IDT drivers) will either not work or not work properly. SigmaTel is now called IDT.