Unsolved

This post is more than 5 years old

5 Posts

138620

May 28th, 2012 19:00

Need help with front panel pin setup

Hey

I currently have a dell vostro 230 slim

I want to now where i would plug in power, Powerled, HDD led, and reset button

The motherboard doesnt have it labeled.

and right now the front panel connecters are bundled up from my case

and i want to know because im buying a new case with all of the connectors seperated not bundled up.

Please help

Here is my motherboard diagram

<ADMIN NOTE: Broken link has been removed from this post by Dell>

8 Professor

 • 

8.8K Posts

 • 

35.3K Points

May 28th, 2012 19:00

PLRSE

HLPWU

+ +

PL = Power LED

HL = HDD activity LED

RS = Reset switch

PW = power switch

E = no pin

U = unused pin

+ = positive (pin one)

5 Posts

May 28th, 2012 20:00

also, thanks for the fast reply :)

5 Posts

May 28th, 2012 20:00

my motherboard panel connectors are this

XXXXXX

XXXXXX

so its 6x2 so its 12 pin not 10 pin

so would it be this?

PLRSUU

HLPWUU

<ADMIN NOTE: Broken link has been removed from this post by Dell>

look on #11

i think you were talking about numb 12 which is the usb front panel

8 Professor

 • 

8.8K Posts

 • 

35.3K Points

May 28th, 2012 20:00

You're welcome.

The plus signs indicate the positive pins -- align those with the plug ends marked with arrows.

5 Posts

May 28th, 2012 20:00

^^

what is the ++ for?

also are you sure that is the right diagram? cause mine has 12 pin and that is 10 pin for the dell vostro 230

also where did u get this information

8 Professor

 • 

8.8K Posts

 • 

35.3K Points

May 28th, 2012 21:00

I hadn't bothered to look and assumed the header was the same as it is on my XPS 7100. You might want to double check that the leads go to the places I said they would.

I had fun (not) installing an Asus mainboard into the XPS 7100 case, as the Asus has some non-standard pin assignments. I had to buy an ATX power switch from Fry's from which to cannibalize a two-pin connector.

5 Posts

May 29th, 2012 04:00

hmm ill try it

11 Legend

 • 

47K Posts

May 29th, 2012 07:00

System Board Layout

Dell™ Vostro™ 230s Service Manual—Slim Tower

1 Power connector (PWR1) 2 Processor heat sink/fan assembly power (CPUFAN1)
3 Memory module connectors (2) 4 Main power connector
5 Battery socket 6 Serial ATA drive connector (SATA3)
7 Serial ATA drive connector (SATA2) 8 Serial ATA drive connector (SATA0)
9 Serial ATA drive connector (SATA1) 10 Chassis fan connector 2(SYS FAN2)
11 Power button & LED connector(LEDH1) 12 Front I/O panel connector (USBF1) ODF2H, X6F8N
13 Card reader connector (USBF_INT1) 14 CMOS jumper (CMOS1)
15 Password jumper (PW_CLR1) 16 Audio connector (AUDIOF1)     57DXW ODF2H
17 PCI connector (PCI1) 18 PCI connector (PCI2)
19 Audio connectors 20 One LAN and two USB ports
21 Two USB ports 22 Onboard video connector (VGA)
23 Chassis fan connector (SYSFAN1) 24 Serial connector
25 PS/2 mouse and keyboard connectors    

Back to Contents Page 

<ADMIN NOTE: Broken link has been removed from this post by Dell>

Dell 0DF2H Vostro 230s Front I/O Panel USB / Audio

Dell 0DF2H Vostro 230s Front I/O Panel USB / Audio

No Events found!

Top