Unsolved
This post is more than 5 years old
1 Rookie
•
1 Message
0
57231
September 16th, 2015 15:00
Precision T7910 with LSI raid controller not presenting the drives
I have a Precision Tower model T7910 with two SSD
drives connected to an LSI Raid Controller.
In order to re-image the computer with our SCCM 2007 environment, I deleted
the preinstalled Windows 7 os, setup a RAID1 array from the two drives. When using diskpart to partition the new disk
array, it does not detect the drive. Has
anyone experienced something similar and have suggested solutions?
0 events found
No Events found!
theflash1932
11 Legend
•
16.3K Posts
0
September 17th, 2015 10:00
Try the Driver Pack for deployments:
http://en.community.dell.com/techcenter/enterprise-client/w/wiki/7558.precision-t7910-windows-7-driver-pack
Otherwise, it is the LSI driver you need:
9341:
http://downloads.dell.com/FOLDER02376965M/1/Storage_Driver_NP9WK_WN_6.703.4.0_A01.EXE
9361:
http://downloads.dell.com/FOLDER02379278M/1/Storage_Driver_DMRVW_WN_6.703.4.0_A01.EXE
You will need to download and run the file to extract contents before use.