Unsolved
This post is more than 5 years old
4 Posts
0
729
Re-activate integrated vieo controller
I'm replacing an old Dimension with an Inspiron, & need to remove the PEG graphics card but the on-board controller is disabled & I fear ending up with no active controller at all!
I'm looking at the Primary video screen of BIOS & it's set to onboard/PEG. Can I make the m/c use whichever controller has a monitor attached to it? If I just remove the graphics card, will the onboard ctrllr automatically reactivate? Could I do this by using Device Manager to disable the card?
Help, please.
speedstep
9 Legend
9 Legend
•
47K Posts
0
January 24th, 2017 06:00
There is no re activation it knows when PEG is in the bus.
rawmichael
4 Posts
0
January 24th, 2017 07:00
Thank you, yes I've seen that screen a few times now. My concern is how to get back to using the integrated controller, preferably without physically removing the peg video card.
rawmichael
4 Posts
0
January 24th, 2017 10:00
Thank you. That is now clear.
speedstep
9 Legend
9 Legend
•
47K Posts
0
January 24th, 2017 10:00
You CANNOT. This is not allowed. You must REMOVE the card to use onboard.