Unsolved
This post is more than 5 years old
1 Message
0
4355
October 1st, 2010 05:00
SCSI interface card
I have a dell Inspiron 530S and an Epson GT_10000+ scanner and recently obtained the necessary SCSI interface card. However the holding steel bracket measures 12 cm in height which is greater than the depth dimensions of my computer .
Can the SCSI card be inserted into my computer and if so how do i get around the bracket size problem
many thanks
phaeoman
No Events found!
speedstep
11 Legend
•
47K Posts
0
October 1st, 2010 05:00
You need a low profile card and bracket.
Adaptec - Adaptec SCSI Card 29320LPE
http://www.adaptec.com/en-US/products/Controllers/Hardware/scsi/entry/ASC-29320LPE/
Ø Adaptec 29320LPE Controller with standard bracket
Ø Replacement low-profile bracket
Ø One 6-position Ultra320 SCSI LVD cable with terminator (kits only) (2138800-R)
Ø Quick Install Guide
Ø CD with drivers and documentation
speedstep
11 Legend
•
47K Posts
1
October 1st, 2010 05:00
The first suggestion is probably more than you want to spend.
Keep in mind that SCSI like Parallell ports and PS2 Keyboards and Mice is something that manufacturers are
NOT supporting in Vista and WIN7. Especially ISA Bus versions of these cards.
Adaptec SCSI Card 2930LP
http://www.adaptec.com/en-US/products/Controllers/Hardware/scsi/entry/AVA-2930LP/