gx110 and Intel graphics controller

Question

The text looks too wide, dark and blurry on my Gx110 733.  Also have a slight flicker and colors don't seem right.  It's hard on the eyes.  Here are my Specs: 512 ram Win2K Prof sp 4 Intel 82810E graphics controller True color 24, 800 X 800, 60Hz refresh rate Small fonts Acceleration: Full Miniport driver for Intel Graphics Driver -ver 6.13.01.3196  dated  7/23/02 Direct X 7 Bits/pixel - 24 Here is what the users manual says regarding Graphics Graphics and Video Graphics architecture Intel Dynamic Video Memory (DVM) technology Graphics accelerator Intel Direct Accelerated Graphics Port (AGP) 2D and 3D graphics accelerator Display cache 4 MB, 133-MHz synchronous dynamic random-access memory (SDRAM) Graphics memory Dynamically assigned from system memory Video resolutions 800 x 600 pixels; 85 hertz (Hz) refresh rate with 16.7 million colors1024 x 786 pixels; 85 Hz refresh rate with 64,000 colors1280 x 1024 pixels; 85 Hz refresh rate with 256 colors1600 x 1200 pixels; 75 Hz refresh rate with 256 colors Is this blurry looking text just due to poor built in graphics or do I have something set wrong?  (the monitor works great with my Gateway PC with nVidia card) Any help would be welcomed. Thanks

Hydralisk00222 · Answer

You probably will want to put the refresh rate to the highest possible (which is probably 85Hz). 60Hz is very hard on the eyes, this is from personal experience

Stickham · Answer

Thanks, I tried 85Hz but it makes the letters in the text have a shadow (very hard on the eyes).

Locked Topics – Desktops General

Was this post helpful?