Unsolved
This post is more than 5 years old
1 Message
0
6102
August 23rd, 2005 06:00
problem with OptiPlex GX260
hi there,
i've got a big problem with a OptiPlex GX260 : it doesn't boot (the screen stays off) but fans are turning, i've tried changing the RAM memory, alimentation, the video card, unlpugging cd/dvd drives and usb ports, but nothing better...
so i've tried to clear cmos...nothing
maybe the problem could come from the mother board or the processor, but i havn't any other of these parts to test.
leds at back are :
A and B are orange
C and D are green
it seems there is no leak on any capacitor.
please help...
thx
i've got a big problem with a OptiPlex GX260 : it doesn't boot (the screen stays off) but fans are turning, i've tried changing the RAM memory, alimentation, the video card, unlpugging cd/dvd drives and usb ports, but nothing better...
so i've tried to clear cmos...nothing
maybe the problem could come from the mother board or the processor, but i havn't any other of these parts to test.
leds at back are :
A and B are orange
C and D are green
it seems there is no leak on any capacitor.
please help...
thx
Message Edited by guigui on 08-23-2005 02:56 AM
0 events found
No Events found!
dwaine74
3 Posts
0
August 24th, 2005 01:00
Memory modules are detected, but a memory failure has occurred.
* If you have two or more memory modules installed, remove the modules, reinstall one module (see "Memory"), and then restart the computer. If the computer starts normally, reinstall an additional module. Continue until you have identified a faulty module or reinstalled all modules without error.
* If available, install properly working memory of the same type into your computer (see "Memory").
Since you have changed the memory out then you are probably looking at a motherboard.
Paulo.DOliveira
40 Posts
0
October 20th, 2005 15:00
Check the link below:
http://support.dell.com/support/edocs/systems/opgx260/en/ug/solvprob.htm#1167139