Unsolved
This post is more than 5 years old
4 Posts
0
5752
Mass Storage Device USB problem
Dimension 8300. Recently started having problems with USB and Mass Storage devices. When I plug in a USB mass storage device, my Olympus digital camera, Ipod shuffle or my HP printer/card reader, it says the drives are not formatted. Can't download photos or get I-tunes to recognize the devices. Any suggestions. I've deleted all the drivers and reinstalled all devices one by one. The USB ports work with all other devices including allowing me to stream video from my Sony camcorder. The devices, camera and IPOD work fine and are recognized on my other computer.
Went so far as to buy a PCI USB card but same problem. Any suggestions?
RoHe
10 Elder
10 Elder
•
44.3K Posts
0
November 3rd, 2006 18:00
Have you tried disconnecting all USB devices, except mouse and keyboard, and then uninstalling all USB entries in Device Manager, and rebooting. When you reboot XP should reinstall the USB ports. Connect the devices back one at a time to see if they're recognized. If you get to a point when connecting another device causes them to fail, you probably need the powered hub, or to connect fewer at a time.
Ron
Georet
4 Posts
0
November 3rd, 2006 21:00
Georet
4 Posts
0
November 3rd, 2006 21:00
meajha
13 Posts
0
July 30th, 2011 22:00
I am also having problems with my usb mass storage device driver. I use Canon Pixma 6700 printer and Windows 7. Printer was doing fine until a week ago when I began getting error Code 10 that there was problem with USB Mass Storage Device and printer no longer would print. I tested the cable and that was fine. My drivers were up to date including the Mass Storage Device driver. When I plugged my back up device into one of the usb ports it works fine. Is the problem in the printer and if so can it be fixed somehow?? I hate to think of purchasing another printer.