Unsolved
This post is more than 5 years old
3 Posts
0
62039
December 17th, 2014 10:00
Precision T5500 does not supported memory configuration
I purchased from an local supplayer a refurbished Precision T5500. Single CPU (QuadCore Intel Xeon X5570) with 8 GB (4x2GB) of ECC registered Ram, 1066MHz.
I upgraded memory with 4GB (2x2GB) and i populated all dimm slots, because in this way the dimm is populated correctly.
When i start the computer, in the morning, my machine runs about 2-3 minutes and after that freezes. I restart the machine and run without any trouble all day. If i remove 4 GB of Ram, from any slots, my machine starts and runs without problem. This fact occurs even if all drives are off, or if i run from a live cd.
I run every test that i found, including Ram extended test-8hours and everything is ok, without errors. The 2 memory of Ram that i upgraded are identical with the rest.
Please help!
0 events found
RoHe
12 Elder
•
45.2K Posts
•
172.6K Points
0
December 17th, 2014 13:00
Do you know if 12 GB RAM (8 GB old+4 GB new) is a supported memory configuration?
Unfortunately, specs in the manual don't list supported RAM configs so that doesn't help...
Do you have the latest version of BIOS, A16?
camoflage2116
1 Message
0
December 17th, 2014 19:00
check out the following link - ajkwa.wordpress.com/2012/03/28/dell-workstation-t5500-memory-configuration
it has a chart detailing the layout and which DIMM slots should be used.
adrind
3 Posts
0
December 17th, 2014 22:00
Yes, i have the latest version of bios (A16).
adrind
3 Posts
0
December 17th, 2014 22:00