Unsolved
This post is more than 5 years old
4 Posts
0
6334
Cab files for Dell 6520
Hi All,
I am trying use mdt 2010 to load an image on a Dell 6520 and each time it loads successfully till the first reboot where I get a stop 0x0000010d and it reboots. I am suspecting the SATA driver and have tried all options in the bios to no avail. Any suggestions?
OS windows 7 w/ integrated sp1
MDT 2010 update 1
Drivers are all separated by make / model
I added the cab file from the dell website.
I am trying use mdt 2010 to load an image on a Dell 6520 and each time it loads successfully till the first reboot where I get a stop 0x0000010d and it reboots. I am suspecting the SATA driver and have tried all options in the bios to no avail. Any suggestions?
OS windows 7 w/ integrated sp1
MDT 2010 update 1
Drivers are all separated by make / model
I added the cab file from the dell website.
ktm_2000
4 Posts
0
May 16th, 2011 11:00
Still a no-go, it loads the image then after first reboot Stop error code 10d
mgoswitz
9 Posts
0
May 17th, 2011 09:00
ktm_2000
4 Posts
0
May 17th, 2011 10:00
1 boot via usb
2. get to point where it is in win pe
3. hit F8 to get dos prompt
4. type diskpart
5. type select disk 0
6 type clean
this wipes out enough to push an OS again, should I be doing more?
DELL-Warren B
1.1K Posts
0
May 19th, 2011 09:00