This post is more than 5 years old
2 Posts
0
228052
No USB Keyboard/Mouse - SCCM - OptiPlex 7040
Good Afternoon,
I am trying to deploy Windows 7 to Optiplex 7040 using SCCM 2012, I have downloaded the CAB and imported the drivers, i have also injected the Ethernet Drivers and it is booting to WinPE fine.
At this point i am being asked for my SCCM Build password but the USB Keyboard/Mouse are working.
I have tried adding and removing the USB drivers from the CAB to the boot image but to no avail.
Any advise?
Rainey86
2 Posts
1
January 11th, 2016 08:00
I added all the physical drivers from the CAB and removed all other USB drivers to make this work.
erikemf
1 Message
0
January 11th, 2016 02:00
Hi Rainey,
Can you tell me which network drivers you injected to get it to work. seems like I can't find the correct ones.
Cheers
Erik
mpitrt
2 Posts
0
January 11th, 2016 12:00
Do you plan to deploy Windows 10? ethernet does not work out of the box, if you are curious. Injecting the drivers into the boot.wim doesn't work. FYI