Unsolved
1 Rookie
•
427 Posts
0
686
Type 13 FW
Hi
What is the lowest firmware level a TYPE13 will take?
Is there a document which states the min/max level of each controller type or can someone say?
Thanks
Unsolved
1 Rookie
•
427 Posts
0
686
Hi
What is the lowest firmware level a TYPE13 will take?
Is there a document which states the min/max level of each controller type or can someone say?
Thanks
Top
dwilliam62
3 Apprentice
3 Apprentice
•
1.5K Posts
0
January 17th, 2022 07:00
hello,
Type 13 has a minimum of 7.x. EQL FW. However, that FW is very old, all newer EQL arrays should be at 10.0.3.
Regards,
Don
tapelibraryfixer
1 Rookie
1 Rookie
•
427 Posts
0
January 17th, 2022 07:00
Hi
im thinking the type13 is differant, 7.1.5 isnt compatible and i think i have only seen 8.1.13 max.
dwilliam62
3 Apprentice
3 Apprentice
•
1.5K Posts
0
January 17th, 2022 08:00
Hello,
No, that is not correct. The Type 13 is a PS4110M controller. From the release notes for 7.x
Select the 32-bit kit for the following array models:
Regards,
Don
dwilliam62
3 Apprentice
3 Apprentice
•
1.5K Posts
0
January 17th, 2022 10:00
Hello,
You probably were using the 64bit FW kit. That controller only supports 32bit Firmware.
Regards,
Don
tapelibraryfixer
1 Rookie
1 Rookie
•
427 Posts
0
January 17th, 2022 10:00
thats odd becuase i put 7.1.5 on the type13's and the serial port said its incompatible.
tapelibraryfixer
1 Rookie
1 Rookie
•
427 Posts
0
January 18th, 2022 02:00
Hi
so all i did is just copy a defaulted sdcard from another controller that had 7.1.5.